What is Sampling? | Zoning Sampling Technique

Sampling:

It is not possible or desirable to test all the raw material or all the final output from a production process because of time and cost constraints. Also many tests are destructive so that there would not be any material left after it had been tested. Because of this, representative samples of the material are tested. 

The amount of material that is actually tested can represent a very small proportion of the total output. It is therefore important that this small sample should be truly representative of the whole of the material. For instance if the test for cotton fibre length is considered, this requires a 20 mg sample which may have been taken from a bale weighing 250kg. The sample represents only about one eleven-millionth of the bulk but the quality of the whole bale is judged on the results from it. 

The aim of sampling is to produce an unbiased sample in which the proportions of, for instance, the different fibre lengths in the sample are the same as those in the bulk. Or to put it another way, each fibre in the bale should have an equal chance of being chosen for the sample.

There are several techniques for sampling fiber. Here is given the most popular sampling method.

Zoning Sampling Technique:
Zoning is a popular testing method of fiber that is used for selecting samples from raw cotton or wool or other loose fibre where the properties may vary considerably from place to place. A handful of fibres is taken at random from each of at least 40 widely spaced places (zones) throughout the bulk of the consignment and is treated as follows. 

Each handful is divided into two parts and one half of it is discarded at random; the retained half is again divided into two and half of that discarded. This process is repeated until about nix fibres remain in the handful (where n is the total number of fibres required in the sample and x is the number of original handfuls). Each handful is treated in a similar manner and the fibres that remain are placed together to give a correctly sized test sample containing n fibres. The method is shown diagrammatically in fig. It is important that the whole of the final sample is tested. 

 Sample from each zone

Zoning Sampling Technique